Skip to content
An articulated truck in a Europe Makine heavy vehicle wash, water running down the trailer The cab of an articulated truck in a Europe Makine heavy vehicle wash

Tunnel wash systems for trucks, buses, trains and cars.

Engineered and built in our own facility. Supplied, installed and handed over complete.

See the systems Explore turnkey
  • 30+ years manufacturing
  • 1,500 m² production facility
  • Exports to Germany, Poland, Italy, Romania, Azerbaijan, UAE and more

What are you washing?

Three Europe Makine gantries washing articulated lorries and rigid trucks across a multi-bay depot

Trucks, buses and trailers

Roll-over wash systems for buses, coaches, rigid trucks, vans and trailers. The SUNRISE W4000 washes to 4.20 m high and 2.85 m wide, travelling on fixed vehicle rails, with chassis spray, PLC control and an optional brushless high-pressure Hydrowash for liveried vehicles.

Truck and bus wash systems
A low-floor tram passing through a Europe Makine rail wash hall

Metro trains and rail vehicles

Wash systems for metro trains, light rail and rail vehicles, engineered to order. Specified around the trainset profile, the depot road and the cycle time available per set. Modular construction, PLC control, water recovery specified per project.

Train and metro wash systems
Interior of a Europe Makine conveyor tunnel, brushes and drying arches lit along the wash lane

Cars, vans and light commercials

Four systems for cars, vans and light commercials: a touchless six-axis rollover, three and five brush rollovers, and a modular conveyor tunnel from 9 to 30 m washing and drying 30 to 60 vehicles per hour.

Car wash systems

Specifications.

4.70 m
Maximum wash height
SUNRISE W4700, for double-deck coaches and high-cube trailers.
30–60
Vehicles per hour
Conveyor tunnel, by model and belt speed.
9–30 m
Modular tunnel length
Built to the bay you have, not a fixed footprint.
100/200 bar
Touchless pump pressure
Acrobat 2X, for vehicles that must not be touched.

Engineered to order.

Chassis wash

Sequential nozzles traverse under the vehicle at 7.5 bar, clearing the salt and road film that brushes never reach.

High-pressure side and wheel unit

Rotating V-jet nozzles at 70 to 100 bar on pressure registers driven by the water itself, for sills, arches and rims.

Control

Industrial PLC with ten wash programs, a counter per program, and fault signalling that reports the address of the fault.

Construction

A1-grade DKP steel, hot-dip galvanised and electrostatic powder coated against corrosion.

Cold weather

Below +4 °C the winter evacuation drains water and chemical lines and turns the brushes so nothing freezes solid.

Installed and warranted

Door to door shipping, free installation and six months warranty on every catalogue machine.

Front view into a Europe Makine conveyor tunnel with drying arches and brushes
A Europe Makine conveyor tunnel, installed and ready for operation.

We Build It You Run It.

  1. 1

    Site & property

    We source a move-in-ready commercial site through our own network.

  2. 2

    Permits

    Zoning, building and operating permits are cleared before you take over.

  3. 3

    Installation

    Machinery is built, delivered, installed and calibrated on site.

  4. 4

    Staffing

    We interview and hire your local floor operators and management.

  5. 5

    Training

    Your crew trains on the equipment until every wash is consistent.

  6. 6

    Handover

    You take the keys to a revenue-ready operation, already running.

Explore turnkey

Work with us.

United States

Become a distributor

We are appointing distributors across the United States to carry the range in a defined territory, with the heavy vehicle and rail end that most equipment lines cannot answer.

Apply for a territory

Ali's Car Wash

Run an Ali's Car Wash

The wash we built and run in Ocala is the model. We are opening conversations with operators interested in running one of their own.

Register your interest
Entrance to Ali’s Car Wash in Ocala, Florida, with the wash lane beyond
Ali’s Car Wash, Ocala, Florida.

A turnkey wash we built and run.

See the Ocala wash
Address
3821 SW College Rd, Ocala, FL 34474
Hours
9 AM to 9 PM

Insights.

July 2, 2026 · 2 min read

Touchless or brushes: what each one trades

Touchless systems wash with pressure and chemistry; brush systems wash with contact. Each choice trades something, and the site decides…

Tell us what you need to wash.

Send us the vehicles and the site. We will come back with a specification.

Request a quote